Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
computer:codemeter_properly_installed_in_debian [2011/01/20 02:37]
tdobes
computer:codemeter_properly_installed_in_debian [2011/02/08 23:22]
tdobes full instructions
Line 7: Line 7:
 SUBSYSTEM=="​block",​ SYSFS{idVendor}=="​064f",​ SYSFS{idProduct}=="​03e9",​ OPTIONS+="​ignore_device"​ SUBSYSTEM=="​block",​ SYSFS{idVendor}=="​064f",​ SYSFS{idProduct}=="​03e9",​ OPTIONS+="​ignore_device"​
  
-# change owner for /​dev/​bus/​usb node: +# change owner for /​dev/​bus/​usb node, load sg module
-SYSFS{idVendor}=="​064f",​ SYSFS{idProduct}=="​03e9",​ OWNER="​codemeter"</​file>​+SYSFS{idVendor}=="​064f",​ SYSFS{idProduct}=="​03e9",​ OWNER="​codemeter"​, RUN+="/​sbin/​modprobe -b sg"</​file>​ 
 +  * put ''​Server.ini''​ in ''/​opt/​codemeter/​etc'',​ then ''​mkdir /etc/wibu && ln -s /​opt/​codemeter/​etc /​etc/​wibu/​CodeMeter''​ 
 +  * make sure there'​s a codemeter user 
 +  * ''​mkdir /​var/​log/​codemeter && chown codemeter:​adm /​var/​log/​codemeter && chmod 750 /​var/​log/​codemeter''​ 
 +  * put CodeMeterLin and codemeter-info in ''/​opt/​codemeter/''​ (be sure to use the CodeMeterLin which the distribution package puts in /​usr/​share/​CodeMeter/​ -- the one in /usr/bin/ is just a wrapper script) 
 +  * put ''​Server.ini''​ in /​opt/​codemeter/​etc/:​ 
 +<​file>​ 
 +[Backup] 
 +Interval=24 
 +Path=/​var/​backups/​CodeMeter 
 +UpdateCertifiedTime=0 
 + 
 +[General] 
 +ActionTimeIntervall=10 
 +BindAddress=0.0.0.0 
 +CleanUpTimeOut=120 
 +ExePath=/​opt/​codemeter 
 +HelpFile=/​opt/​codemeter/​doc 
 +IsNetworkServer=1 
 +IsUpdateInstall=1 
 +LogCleanupTimeout=336 
 +Logging=1 
 +LogPath=/​var/​log/​codemeter 
 +NetworkAccessFsb=0 
 +NetworkPort=22350 
 +NetworkTimeout=40 
 +ProxyPort= 
 +ProxyServer= 
 +ProxyUser= 
 +ShowFPPDialog=0 
 +StartDaemon=1 
 +StartAlways=0 
 +TimeServerTimeout=20 
 +TimeServerURL1=cmtime.codemeter.com 
 +TimeServerURL2=cmtime.codemeter.us 
 +TimeServerURL3=cmtime.codemeter.fr 
 +TimeServerURL4=cmtime.codemeter.de 
 +UDPWaitingTime=1000 
 +UpdateInstallURL=www.wibu.com 
 + 
 +[HTTP] 
 +HtmlArchive=/​opt/​codemeter/​CodeMeterUs.wbb 
 +RemoteCommand=0 
 +RemoteRead=0 
 +RemoteWrite=0 
 + 
 +[HOTPLUG] 
 +UseHotplugLog=0 
 + 
 +</​file>​
computer/codemeter_properly_installed_in_debian.txt · Last modified: 2015/07/13 03:22 by tdobes
Recent changes RSS feed Driven by DokuWiki Valid XHTML 1.0 Valid CSS