This is an old revision of the document!


  • usb device: ID 064f:03e9 WIBU-Systems AG
  • license number: 900122905
  • to set the appropriate permissions using udev, make a file called /etc/udev/rules.d/52-codemeter.rules containing:
# disable automount for CmSticks without real flash part
SUBSYSTEM=="block", SYSFS{idVendor}=="064f", SYSFS{idProduct}=="03e9", OPTIONS+="ignore_device"

# change owner for /dev/bus/usb node, load sg module:
SYSFS{idVendor}=="064f", SYSFS{idProduct}=="03e9", OWNER="codemeter", RUN+="/sbin/modprobe -b sg"
  • put Server.ini in /opt/codemeter/etc, then mkdir /etc/wibu && ln -s /opt/codemeter/etc /etc/wibu/CodeMeter
  • make sure there's a codemeter user
  • mkdir /var/log/codemeter && chown codemeter:adm /var/log/codemeter && chmod 750 /var/log/codemeter
  • put CodeMeterLin and codemeter-info in /opt/codemeter/ (be sure to use the CodeMeterLin which the distribution package puts in /usr/share/CodeMeter/ – the one in /usr/bin/ is just a wrapper script)
  • put Server.ini in /opt/codemeter/etc/:
[Backup]
Interval=24
Path=/var/backups/CodeMeter
UpdateCertifiedTime=0

[General]
ActionTimeIntervall=10
BindAddress=0.0.0.0
CleanUpTimeOut=120
ExePath=/opt/codemeter
HelpFile=/opt/codemeter/doc
IsNetworkServer=1
IsUpdateInstall=1
LogCleanupTimeout=336
Logging=1
LogPath=/var/log/codemeter
NetworkAccessFsb=0
NetworkPort=22350
NetworkTimeout=40
ProxyPort=
ProxyServer=
ProxyUser=
ShowFPPDialog=0
StartDaemon=1
StartAlways=0
TimeServerTimeout=20
TimeServerURL1=cmtime.codemeter.com
TimeServerURL2=cmtime.codemeter.us
TimeServerURL3=cmtime.codemeter.fr
TimeServerURL4=cmtime.codemeter.de
UDPWaitingTime=1000
UpdateInstallURL=www.wibu.com

[HTTP]
HtmlArchive=/opt/codemeter/CodeMeterUs.wbb
RemoteCommand=0
RemoteRead=0
RemoteWrite=0

[HOTPLUG]
UseHotplugLog=0
computer/codemeter_properly_installed_in_debian.1297228952.txt.gz · Last modified: 2011/02/08 23:22 by tdobes
Recent changes RSS feed Driven by DokuWiki Valid XHTML 1.0 Valid CSS