This is an old revision of the document!

* VM: 2 cores, 2 sockets (numa); 2gb ram; 50 GB virtio HDD on qcow2 (iothread); virtio nic; 2k12r2 vl iso on ide2, virtio iso on ide3
* VM for print: 2nd 50 GB virtio HDD on qcow2 (iothread)                                                  
* DC's: datacenter server core                                                                              
* print: datacenter with GUI                                                                                     
* load driver: virtio -> viostor -> 2k12r2 -> amd64                                                                  
* next (install on main hdd in a single partition)                                                                     
* set initial password, log in                                                                                                 
sconfig - option 2 - set name, reboot                                                                                              
install netkvm and baloon drivers using pnputil                                                                                       
install blnsvr.exe service                                                                                                                  
* sconfig:                                                                                                                                        
4 - 1, 3, yes, 4                                                                                                                                      
7 - e, 2                                                                                                                                                  
9 - change timezone to central, set hours correctly (-2)                                                                                                                  
8 - 10, 1, s,, (enter),, 4                                                                                                                                 
5 - a

Install-WindowsFeature AD-Domain-Services
Install-WindowsFeature DNS

on 1st DC:
dcpromo /ConfirmGc:Yes /ForestLevel:4 /DomainNetBiosName:"CES" /InstallDNS:Yes /NewDomain:Forest /NewDomainDNSName:"" /RebootOnSuccess:Yes /ReplicaOrNewDomain:Domain /SafeModeAdminPassword:"**PASSWORD**"
(wait for AD to set up and server to reboot, then log in again)

on 2nd DC:
8 - 10, 2,, (enter), 4

dcpromo /ConfirmGc:Yes /ForestLevel:4 /DomainNetBiosName:"CES" /InstallDNS:Yes /RebootOnSuccess:Yes /ReplicaDomainDNSName:"" /ReplicaOrNewDomain:Replica /SafeModeAdminPassword:"**PASSWORD**" /UserDomain:"" /UserName:"Administrator" /Password:"**PASSWORD**"
(wait for AD to set up and server to reboot, then log in again)

8 - 10, 2,, (enter), 4

on management VM:
join domain
set up DNS settings to resolve upstream successfully

on both:
netsh interface ipv4 set winsservers "Ethernet" static
run purdue_kms.cmd

time settings (see on both domain controllers:

rem formerly NT5DS:
reg add HKLM\SYSTEM\CurrentControlSet\Services\W32Time\Parameters /v Type /d NTP /f

rem formerly 0xa:
reg add HKLM\SYSTEM\CurrentControlSet\Services\W32Time\Config /v AnnounceFlags /t REG_DWORD /d 0x5 /f

rem formerly,0x9
reg add HKLM\SYSTEM\CurrentControlSet\Services\W32Time\Parameters /v NtpServer /d ",0x8,0x8,0x8,0x8" /f

net stop W32Time
net start W32Time
w32tm /resync
computer/domain_controller_2k12_notes.1486749556.txt.gz · Last modified: 2017/02/10 11:59 by tdobes
Recent changes RSS feed Driven by DokuWiki Valid XHTML 1.0 Valid CSS