Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
computer:raspberry_pi_browser_v2 [2019/01/05 19:07]
tdobes
computer:raspberry_pi_browser_v2 [2019/01/05 21:43]
tdobes
Line 1: Line 1:
-====== Raspberry Pi - Slideshow ​v2 ======+====== Raspberry Pi - Browser ​v2 ======
 <​code>​ <​code>​
 passwd passwd
Line 198: Line 198:
 sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=2/​g;​ s/#​hdmi_mode=1/​hdmi_mode=82\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=2/​g;​ s/#​hdmi_mode=1/​hdmi_mode=82\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt
 # HDMI mode, 1920x1200@60 Hz without audio - see https://​www.raspberrypi.org/​documentation/​configuration/​config-txt/​video.md # HDMI mode, 1920x1200@60 Hz without audio - see https://​www.raspberrypi.org/​documentation/​configuration/​config-txt/​video.md
-sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=1/​g;​ s/#​hdmi_mode=1/​hdmi_mode=69\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt+sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=1/​g;​ s/#​hdmi_mode=1/​hdmi_mode=68\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt
  
 # quiet boot # quiet boot
computer/raspberry_pi_browser_v2.txt · Last modified: 2019/02/23 13:07 by tdobes
Recent changes RSS feed Driven by DokuWiki Valid XHTML 1.0 Valid CSS