Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
computer:raspberry_pi_browser_v2 [2019/01/05 19:13]
tdobes
computer:raspberry_pi_browser_v2 [2019/01/05 21:43]
tdobes
Line 198: Line 198:
 sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=2/​g;​ s/#​hdmi_mode=1/​hdmi_mode=82\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=2/​g;​ s/#​hdmi_mode=1/​hdmi_mode=82\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt
 # HDMI mode, 1920x1200@60 Hz without audio - see https://​www.raspberrypi.org/​documentation/​configuration/​config-txt/​video.md # HDMI mode, 1920x1200@60 Hz without audio - see https://​www.raspberrypi.org/​documentation/​configuration/​config-txt/​video.md
-sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=1/​g;​ s/#​hdmi_mode=1/​hdmi_mode=69\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt+sed -i '​s/#​hdmi_group=1/​hdmi_group=2/​g;​ s/#​hdmi_drive=2/​hdmi_drive=1/​g;​ s/#​hdmi_mode=1/​hdmi_mode=68\n\nhdmi_force_mode=1/​g;​ s/#​disable_overscan=1/​disable_overscan=1/​g;​ s/#​hdmi_force_hotplug=1/​hdmi_force_hotplug=1/​g'​ /​boot/​config.txt
  
 # quiet boot # quiet boot
computer/raspberry_pi_browser_v2.txt · Last modified: 2019/02/23 13:07 by tdobes
Recent changes RSS feed Driven by DokuWiki Valid XHTML 1.0 Valid CSS