This is an old revision of the document!


  • Drivers (KVM / Proxmox VE)
    • ensure that virtio CD is mounted on E (temporarily)
    • pnputil -i -a E:\NetKVM\2k12R2\amd64\netkvm.inf
    • select “Install” and leave “Always trust software” checked
    • pnputil -i -a E:\Balloon\2k12R2\amd64\balloon.inf
    • copy E:\Balloon\2k12R2\amd64\blnsvr.exe %SystemRoot%\system32\
    • %SystemRoot%\system32\blnsvr.exe -i
  • Network Settings
    • set ip addresses: netsh interface ipv4 set address “Ethernet” static 10.2.25.236 255.255.255.0 10.2.25.254
    • set dns servers: netsh interface ipv4 set dnsservers “Ethernet” static 10.2.25.230 primary, netsh interface ipv4 add dnsservers “Ethernet” 10.2.25.231 index=2, netsh interface ipv4 add dnsservers “Ethernet” 10.2.25.100 index=3
    • set wins servers: netsh interface ipv4 set winsservers “Ethernet” static 10.2.25.230, netsh interface ipv4 add winsservers “Ethernet” 10.2.25.231 index=2
  • use sconfig
    • change computer name (2)
    • enable ping (4,3,yes)
    • enable remote desktop (7,e,2)
    • change timezone (9)
    • restart (13)
computer/windows_2012_r2_server_core_setup.1436745628.txt.gz · Last modified: 2015/07/12 19:00 by tdobes
Recent changes RSS feed Driven by DokuWiki Valid XHTML 1.0 Valid CSS